Antriebsrolle 42mm mit Schrauben-Mutter für 3300, 3800, 4600 und 5000, neu

Tire black 19 inch with friction roller profile, new

Size: 1¾ x 19 (1.75 x 19"or 550.00mm).

Suitable for example for the VeloSoleX-models 1400, 1700, 2200, 3300, 3800, the VeloSoleX-models Impex S 3800 and Roland Garros (Hungary - from year 1993 to 2004) with plastic handles, 4600 (export USA), the Dutch VeloSoleX-oto/ami and the model Black'n Roll S4800 with 19-inch rims for the front and rear wheels.

Designation: Cyclomoteur Renforce, VWP Tire by Deli, 21B, Max. Load 180 LBS, AT 36 PSI Cold. Max Speed 30MPH-2 Nylon Plies - Tubetype, SA-219-01, 1 3/4 - 19.

Recommended tire pressure at front wheel: 2.00bar (200 kPa or 29 PSI) to 2.50bar (220 kPa or 32 PSI).
Recommended tire pressure at rear wheel: 2.00bar (200k kPa or 29 PSI) to 3.00bar (250 kPa or 36 PSI).
Inner Diameter: 480.00mm.

Suitable Steel Wheel no. 18019 and no. 18021.

Not original. Reproduction.

Nomenclature no. 11003 valid from March 1967 and from engine no. 3.800.000 - Tire.

NGK spark plug BR8HIX Iridium, new

NGK Iridium IX - the alternative for even more power.

These high-performance spark plugs with a center electrode made of the precious metal iridium are used by many original equipment manufacturers.

They have been specially developed for the latest engine technologies, but they are also the alternative to the standard type for older models to make full use of power reserves.

The special thing about it:
- The electrode material Iridium is almost resistant to spark erosion.
- Iridium allows especially narrow center electrodes of only 0.6 mm in diameter.
- With narrow center electrodes, more ignitable mixture reaches the ignition spark. This leads to a reliable ignition and better propagation of the flame front.

Also suitable for the VeloS-models and the model Black'n Roll S4800.

Recommended electrode spacing for contact-controlled ignition system (VeloS) 0.50mm, but not less than 0.40mm.

Recommended Electrode Distance for Electronic Ignition System (Black'n Roll S4800) 0.60mm - Manufacturer no. 7001.

NOTE:
Comparison charts for spark plugs can be found in the WebShop under Information.

Clutch lining - hard, new

2 pieces are required for installation.

Dimensions: 20.00 x 5.00 x 35.00mm.

Suitable for example for the VeloS-models 1700, 2200, 3300, 3800, the VeloS-models Impex S 3800 and Roland Garros (Hungary from 1993 to 2004 with plastic handles), 4600 (export USA), 5000 (also Dutch), Dutch oto/ami and the Black'n Roll S4800 model.

Not an original. Reproduction.

Nomenclature no. 11.309 valid from March 1967 and from engine no. 3.800.000 - clutch lining.

Bearing set for drive roller - 1700, 2200 and 3300, new