Staubkappe für die Vorderradnabe, neu

Front hub 28 hole complete, new

Suitable for example for all models from 45cc to the models Impex S 3800 and Roland Garros (Hungary from year 1993 to 2004) with plastic handles, 4600 (export USA) and 5000 - also Dutch.
Reproduction with a smaller diameter than the original hub.

NOTE:
On the spoke lengths: 1x crossed inside-220.00mm, 1x crossed outside 225.00mm or 2x crossed inside 225.00mm and 2x crossed outside 230.00mm.
The 19 inch steel rim smooth with 28 spoke holes.

NOTE:
When using the WWS spokes, the holes in the hub must be slightly drilled.

Not an original. Reproduction.

Nomenclature no. 10994 valid from March 1967 and from engine no. 3.800.000 - Front wheel hub.

Bearing ball set front hub, new

Diameter: 5.55mm (7/32 ").
1 set = 11 steel balls.

Also fits the front hub with front brake and the rear hub with drum brake for the VeloS-models.

Nomenclature no. 10404 valid from March 1967 and from engine no. 3.800.000 - ball for hub.

Simmerring crankshaft EARLY version with collar, new

Dimensions: 21.6 - 40- 6.1 / 4.

Suitable for example for the models of the 60s and 70s.

When installing please make sure that the closed side with the collar to the crankcase is installed.

NOTE:
Not for the model Black'n Roll S4800.

Not original. Reproduction.

Bearing ball set front hub, new

Diameter: 6.35mm (1/4 ").
1 set = 10 steel balls.

Also suitable for the VeloS-models with front brake.

Nomenclature no. 10404 valid from March 1967 and from engine no. 3.800.000 - ball for hub.